D100 Portable Small Engine Dyno

Here at Go Power, we know small engine dynos. That's how we started! Our first dynamometers were developed in the late 1950s in Palo Alto, California when we were building systems to test basic go-kart engines.

Today we bring you the Go Power D100 small engine dyno (dynamometer). The D100 allows you to test engines from 10 to 100 horsepower at engine speeds up to 14,000 rpm with durability and accuracy to meet even the most demanding industrial requirements.

This lightweight, compact unit is rugged — constructed of high-strength aluminum alloy and can be operated from a water supply almost anywhere. Its extreme versatility makes it ideal for use with “go-cart” or outboard marine engines as well as industrial durability testing for engines and components.

The D100 is the choice dynamometer of many Formula SAE teams around the world. We also offer discounted pricing for SAE teams as well as for educational institutions! Call  Sales to discuss—we can be reached at +1 248-579-4295 (press 1 for Sales). 

Here's a short 1-minute video telling you more about the D100 Small Engine Dyno:

The D100 small engine dyno is compatible with our complete line of digital consoles and state of the art control systems. This unique modular design provides maximum flexibility to expand to your system as your testing requirements grow.

To Request More Information Click: REQUEST INFO and/or PRICING 

  D100 Small Engine Dyno Features

• Low-facility water consumption
• Portable, ultra lightweight
• Adaptation through flex coupling
• D100 tests both vertical and horizontal output shaft engines
• Includes strain gauge load cell, speed sensor, barbed hose couplings, inlet/outlet hoses
• Bi-directional, reliable, and cost-effective
• Long service-life cycle
• High-Strength aluminum alloy construction/hardened stainless steel shaft
• Horizontal and vertical mounting
• Low Power option with light duty seals and cropped rotor (optional)
• A mechanical seal-feed cooling line for unloaded free spin mode (optional)

Click for D100 Small Engine Dyno Duty Curve:  D100 Information Sheet

D100 Small Engine Dyno System Package

Essential Small Engine Dyno Package for Small Engine Testing

As with all the Go Power Dynos, the D100 can be purchased as an individual unit, or as part of a complete test package:

The EDP100 Essential Dynamometer System Package is a portable small engine testing package consisting of:

• D100 Dynamometer (see above for details)
• TCA100 torque calibration arm assembly (metric or imperial, weights not included) (Note: dyno should be calibrated every 6 months)
• VS3001 manual load control valve set
• DC200 digital display console. Read more about the DC200
• IKIT001 interface harness kit (speed and torque)

The EDP100 is perfect for the small engine tester that does not require a data acquisition system but is looking to simply get readings on RPM, Speed and Torque. If an actual data acquisition system is desired, the ADP package (below) would be appropriate.

To Request More Information Click: REQUEST INFO and/or PRICING 

GPS6000 Data Acquisition System

The ADP100 Advanced Dynamometer Package includes all of the components listed in the EDP package, except the GPS6000 Data Acquisition System is supplied in place of the DC200 Display Console.

• D100 Dynamometer (see above for details)
• TCA100 torque calibration arm assembly (metric or imperial, weights not included) (Note: dyno should be calibrated every 6 months)
• VS3001 manual load control valve set
• GPS6000 Digital Acquisition System
• IKIT001 interface harness kit 

Read more about the GPS6000 by clicking on the GPS6000 photo.

To Request More Information Click: REQUEST INFO and/or PRICING