Diesel Engine Dynamometer

Go Power EDP Dynamometer Package

EDP 1000/2000/3000 Essential Dynamometer Package for Diesel Engine Testing (DT2000 shown)

DT Series Hydraulic Diesel Engine Dynamometers: DT1000 | DT2000 | DT3000

DT-1000 Diesel Engine Dynamometer Dyno

The Go Power DT1000/Diesel Engine Dyno

The DT Series diesel engine dynamometer is designed to be quickly and easily fitted to an engine mounted on a fixed base or mobile engine stand. When combined with a Go Power instrumentation package, it allows precise and repeatable testing results with minimum set up time.

The DT1000 is designed for use with light to medium duty diesel engines at speeds up to 3500 rpm continuous and 4000 rpm intermittently. The power absorption profile is uniquely suited for testing piston-type aircraft engines such as Lycoming and Teledyne Continental.

DT3000 Diesel engine dynamometer

DT3000 on a Cummins Diesel Engine

The larger DT-range (DT2000 and DT3000) are used with industrial diesel engines at speeds up to 5000 rpm. We manufacture many dynamometer stands to suit practically any test setup. When a chassis dynamometer is not practical or available, the DT-series dynamometers can be fitted with our IFA-D2000 in-frame adapter. This device can be mounted within the driveline of heavy-duty trucks for in-vehicle engine testing.

DT Engine Adapt 2

IFA-D2000 In-Frame Adapter

Click the following links to learn the specifications of each model in this series and view the duty curves:

 

 DT Series Diesel Engine Dynamometer System Packages

As with all the Go Power dynos, the DT series can be purchased as an individual unit or as part of a complete test package: 

Go Power EDP Dynamometer Package

Essential Dynamometer Package (DT2000 shown)

The EDP1000/2000/3000 Essential Dynamometer System Package is a portable diesel engine dynamometer testing package consisting of:

  • DT1000, 2000 or 3000 Dynamometer (see above for details)
  • Torque calibration arm assembly (metric or imperial, weights not included) (Note: dyno should be calibrated every 6 months)
  • Manual load control valve set
  • DC200 digital display console. Read more about the DC200
  • Interface harness kit (speed and torque)

The EDP is perfect for the diesel engine tester that does not require a data acquisition system but is looking to simply get readings on RPM, Speed and Torque. If an actual data acquisition system is desired, the ADP package (below) would be appropriate.

 


 

The ADP1000/2000/3000 Advanced Dynamometer Package includes all of the components listed in the EDP package, except the GPS6000 Data Acquisition System is supplied in place of the DC200 Display Console. This package contains:

GPS6000 Data Acquisition System

GPS6000 Data Acquisition System

  • Dynamometer (see above for details)
  • Torque calibration arm assembly (metric or imperial, weights not included) (Note: dyno should be calibrated every 6 months)
  • Manual load control valve set (Servo load control valve supplied with the RDP Package below) 
  • GPS6000 Digital Acquisition System
  • Interface harness kit (speed and torque)

Read more about the GPS6000 by clicking on the GPS6000 photo. 


The RDP1000/2000/3000 Remote Dynamometer Package includes all of the components listed in the ADP package, except a Servo Load Control Valve is supplied in place of the Manual Load Control Valve. This package contains:

  • Dynamometer (see above for details)
  • Torque calibration arm assembly (metric or imperial, weights not included) (Note: dyno should be calibrated every 6 months)
  • Servo load control valve 
  • GPS6000 Digital Acquisition System
  • Interface harness kit