CT-1500The CT104 cooling tower is a single-pass type heat exchanger used primarily in heavy diesel and other large engine applications with high cooling water volume requirements. This unit operates on a through-flow principle.

Hose connections are made from the CT104 to the engine. The drain valve is then shut and the fill valve opened. When the level in the tank indicates full in the sight glass, the fill valve is shut and the engine starts and warms up. After normal operating temperature is reached, the temperature regulating valve will open allowing cold, fresh water in, thereby displacing cycled water through the overflow tube until it reaches the system’s required temperature. This process is continuous under steady-state operating conditions.

  • Adjustable thermostatic temperature control
  • Industrial-grade gauges for temperature and pressure
  • Water level sight glass
  • Rugged construction
  • Replaces need for radiator
  • Ease of operation
  • Wall or mobile cart mounted
  • Low maintenance

Rated up to: 1,500 Bhp

Make-up water requirement: 75 gpm (US) maximum

Operating temperature range: 162 - 230° F

Operating pressure range: 0 - 50 psi

Inlet & outlet shutoff gate valves: 1-1/4 in

Inlet & outlet barb fittings: 1-1/4 in O.D. (male)

Mounting: two welded steel brackets

Vessel height: 48 in

Vessel diameter: 10 in