cooling tower

CT102/3 Cooling Tower

The CT102/3 cooling tower is a single-pass type heat exchanger used primarily in automotive, small diesel, and other engine applications with low cooling water volume requirements. This unit operates on a through-flow principle.

Hose connections are made from the CT102/3 to the engine. The drain valve is then shut and the fill valve opened. When the level in the tank indicates full in the sight glass, the fill valve is shut and the engine starts and warms up. After normal operating temperature is reached, the temperature regulating valve will open allowing cold, fresh water in, thereby displacing cycled water through the overflow tube until it reaches the system’s required temperature. This process is continuous under steady-state operating conditions.

  • Compact and efficient
  • Adjustable thermostatic temperature control
  • Water level sight glass
  • Lightweight aluminum construction
  • Replaces need for radiator
  • Ease of operation
  • Wall or engine cart mounted (wall bracket provided)
  • Internal engine oil cooler (CT102 only)

Rated up to: 1,000 Bhp

Make-up water requirement: 34 gpm (US) maximum

Operating temperature range: 50 - 200° F

Operating pressure range: atmosphere/vented

Inlet & outlet shutoff gate valves: 3/4 in

Inlet & outlet barb fittings: 1/2 in O.D. (male)

Mounting: two aluminum brackets with steel straps included

Vessel height: 60 in

Vessel diameter: 6 in